Security lighting is essential for every residence! We have all encountered outdoor lighting along the streets of our hometowns, at restaurants and social meeting spots, and in neighborhoods.
Security lighting is an investment that has several returns and serves multiple purposes. You can get some of that technology if you so choose. Continue reading to discover more about motion sensor Security lights.
Here are 11 things you should know about security lights:
1. How to hide infrared lights on a security camera?
A security camera’s front infrared LED is often lighted to signal that it is operational. While an intruder’s awareness of a security camera may serve as an additional deterrent, you can make the IR LEDs’ “glow” invisible if you do not desire to draw attention to the camera.
Position the duct tape directly over the security camera’s panel and push it down with your fingers. The second piece of similar duct tape should be applied to the panel. The saturation of the duct tape will hide the brightness of the infrared LED.
2. What does blue light on a security camera mean?
A blue flashing light on a security camera indicates the complete WiFi secured setup. To activate the WiFi-protected setup mode, press and release the WiFi-secured setup button until the blue light starts flashing (about three seconds).
3. Can you complain about a neighbors security lights?
If they are shining on your property, you should complain to them. But if they are shining onto their own property and you’re the one who is bothered, then you should resolve your complaint with the state.
There are laws which govern the use of lights. You can ask your local sheriff office for the state laws which govern the use of security lights.
4. Why is my security light staying on?
The security light is stuck in the “always-on” mode. This is a function found on most security lights, and it may be activated in several ways. Sadly, though, many of these paths are mostly unplanned. The security lights will not turn off if:
- Voltage spikes occur
Surges in electrical current are the most typical cause of this issue. The quick loss and restoration of power will activate the override mechanism for your security lights, causing them to remain on forever.
- The lights are turned on and off too rapidly.
If you have inadvertently (or on purpose) fast toggled the primary activation key for your security lights off and then back on, you will have the same issue for much the same reasons.
5. Are solar powered security lights any good?
Solar Powered Security Lights are a brilliant alternative to both wired and battery powered security lights.
They have been around for a while now but they are only becoming more and more popular as people continue to realize the benefits. There is no doubt that these lights are an excellent additional security feature for any property.
6. Do security lights have cameras?
Yes, nowadays security lights are coming with cameras for the purpose of surveillance. The cameras are installed at the top of the light posts.
The security lights have sensors too which detect motion and record the videos. The videos can be stored in the cloud and accessed over internet.
7. How many lumens for outdoor security light?
Lumens are a unit of light measuring that may help you determine the intensity of your lights. For outdoor lighting, you’ll need a minimum of 50 lumens for low background illumination, up to 2400 lumens for driveway and security lights, and other possibilities.
8. How to replace the motion sensor on the security light?
A security light lights when its motion system senses motion in the area it is pointed towards.
A failing sensor on a security light may be replaced so that the security light can continue to work. A few everyday home items and a new motion sensor from an electronics shop will be required.
- Disconnect the current supply first.
- Remove the front panel of the security light using a Phillips jeweler’s screwdriver.
- Release the two screws wrapped in the motion sensor’s black and red wires.
- Insert the new motion sensor into the slot.
- Restore electricity to the security light.
9. How long do battery-operated security lights Last?
It depends on the type of batteries and how long they’re used. For example, when using alkaline batteries, security lights should last up to six months before needing to be replaced.
On the other hand, some of the newer, more efficient lithium battery types can last up to eight times longer.
10. What bulbs do security lights use?
Security lights can be powered by either halogen or LED lamps. Halogen lamps are the most widely used bulbs for security lights.
Halogen lights have a brighter and warmer light than LEDs. They can be used for both high and low-voltage security lights. Halogen security lights are very efficient, consume less power but they are more expensive than LEDs.
11. Do security lights deter burglars?
Yes, they do – criminals often target homes with poor security. And the majority of break-ins occur at night, when criminals may take their time entering your home under cover of darkness. Due to both of these factors, outdoor lighting is a very effective deterrent.
It is essential to note that even the most effective security lights cannot substitute a good security system. As an added precaution, security lighting reinforces the message that your property is not worth the hassle. If you have significant security worries, you should consider a comprehensive security system to supplement your security lights.